<address id="rfnvp"></address>

    <address id="rfnvp"><nobr id="rfnvp"><meter id="rfnvp"></meter></nobr></address>
    <address id="rfnvp"><listing id="rfnvp"><menuitem id="rfnvp"></menuitem></listing></address>

        <sub id="rfnvp"></sub>
        中文 ENGLISH  
        About us Honor Products Order Network Contacts Home

         HH-2 Primary Deck Covering

         HQ-1 Lightweight Primary ...
         HQ-2 Super Lightweight ...
         HH-3 (A-60 Class) Fireproof...
         HH-4 (A-60 Class) Fireproof...
         HH-5 (A-60 Class) SuperLight...
         HHF-1 (A-60 Class) Floating...
         HX-1 Open Deck Covering
         HJL-1 Leveling Deck Covering
         HT-02 Marine Covering Coat
        HOME >> HJL-1 Marine Leveling Deck Covering

        一.Structure Type:
        二.Technical Index:
        No. Item name Index Executive standard


        Initial setting time
        Final setting time
        Modulus of rapture
        Compressive strength
        Water absorption
        Oil absorption
        Heat conductivity
        Not readily ignitability, smoke & toxicity
        Weight per square meter

        In accordance with IMO.FTPC Parts 2,5/IMO.A653(16)


        Characteristic: Form with flat and smooth
        Applicable for: Patch up the roughness of each primary covering application and the leveling coat of A-60          class deck
        Consume amount: 4.0~4.5 kg/m2
        Packing: Dry material (A component): 18 kg/pack; Liquid (B component): 5.5kg/barrel (Determinated      according to the temp. and humidity)
        Storage: Cool and dry place, moisture-proof, the quality guarantee period is 3 months
        Approval Certificate: CCS

        四.Application Method:
        4.1 Application Procedures
        4.1.1 Before application, the covering shall be at least freely maintained 7 days, the application of the product shall be carried out until the base covering completely hardened. The dusts, oils, paints and other impurities on the covering surface shall be completely removed.
        4.1.2 If the surface of covering is too dry, a suitable amount of water or maintaining agent should be sprayed onto the surface, and it is applicable for no water seeping.
        4.1.3 Stir the dry materials (A component) and the liquid (B component) evenly in agitator according to the specified ratio of A:B=1:1(pack rotio), and then pour the covering onto the surface of covering and leveling the covering surface with trowel.

        5.1 In order to ensure the fluidity of covering, it shall be strictly applied according to the blending ratio of the product and shall not any changed the blending ratio of the product.
        5.2 The application thickness of the covering shall be strictly controlled and not be over 3mm. If the roughness on the surface of the covering is over 3mm, it should be flattened by abrading and repaired to be flat using the same covering.
        5.3 If the dry material is obviously caked, the liquid is emulation-breaking and settled, it shall not be used.

           Huzhou City Huicheng Marine Covering Co.,Ltd.  Tel:0572-2042222  Fax:0572-2045524
        Address: No.1 Licun Road , Huzhou City, Zhejiang Province   E-mail:huicheng1122@126.com